Complete configured system
Power, communications, mounting and optional field equipment for the agreed application.
Remote power systems
Your load determines
the system.
We configure generation, storage, communications, protected DC distribution and mounting around the application — not a universal box on a price list.
Discuss your application →Project configuration
Start with the
application.
What needs power? Where will it operate? How long must it remain autonomous? How will it communicate? How will it be mounted?
Those questions guide the platform. Sectronics then configures the generation, storage, protection, communications and mechanical package around the project.
APPLICATION→LOAD→AUTONOMY→POWER→PLATFORM
01
Solar generation
Commercial PV selected to suit the expected load, location and required recharge performance.
02
Battery storage
LiFePO₄ storage configured to suit the project. 120Ah may suit one application; 200Ah, 300Ah or larger may suit another.
03
Power management
Victron MPPT technology selected around the project architecture and solar capacity.
04
Protected DC
PV, battery and DC circuits are protected by individual breakers, with hardwired auxiliary and communications circuits individually fused.
05
Communications
Cellular, satellite/Starlink, Ethernet, Wi-Fi and PoE options can be integrated where required. Generation and storage are configured to suit the communications load.
06
Mounting
In-house fabricated poles and solar brackets, plus enclosure mounting for Sectronics, square or round poles.
Installation-ready enclosure
Position it.
Bolt it.
Keep moving.
The standard 500 × 500 × 250 mm metal enclosure is designed around direct bolt-through mounting to the Sectronics pole. The preferred method provides a strong, clean and repeatable installation, with alternative project-specific mounting arrangements available where required.
500H × 500W × 250DDirect bolt-through mountingAlternative mounting optionsProject-configured internals
Protection engineered in
PV, battery and DC circuits
protected individually.
Isolation, protection and serviceability belong inside a professional off-grid platform.
PVIndividual circuit breaker protection
BATTERYIndividual circuit breaker protection
DCIndividual circuit breaker protection
AUXHardwired circuits individually fused
What is inside matters
Professional components.
Clear serviceability.
The real value of an off-grid platform is not only what can be seen from the outside. It is the way charging, isolation, communications and circuit protection are arranged inside the enclosure.
Final equipment and ratings are selected for the project, while the Sectronics philosophy remains consistent: build it so it can be understood, commissioned and supported.
Flexible supply
Complete solution or
the platform beneath it.
Power + communications
Solar, storage, protected DC, router, switching, antennas and mounting.
Power platform
Solar, storage, enclosure and protected DC for your own networking and devices.
Mechanical & selected components
Enclosure, solar assembly, in-ground pole, bolt-down pole or mounting hardware.
Mounting
Fixed properly.
Not improvised onsite.
Available for permanent and semi-permanent installations using a concrete footing.
Available for suitable existing concrete or engineered foundations using a base plate.
In development. Earlier concepts were rejected because they did not meet our expectations for stability and safety.
Need a remote power platform?
Start with the application.
You do not need to arrive with the solar or battery answer. Tell us what the equipment needs to achieve and where it has to operate.
Discuss your application →